Welcome! How can we help?

How to enable PTZ camera auto tracking on the NVR/Phone ?

On NVR Side:

When you add the PTZ cameras to the exsisting system as add-on cameras:

Go to System setting-CH Setting- Video Detection and enable the Motion Detection Tracking

On the phone:

Open the app, click "..." at upper right corner of your device, Choose "Device Setting"

In "Smart Detection", Enable the Motion Detection Tracking

====

If your NVR firmware is earlier than 3.1.4.4, or your camera version is older than 3.6.28; you need to upgrade your camera/ NVR to obtain the auto track feature. 

1. Update your NVR version to 3.1.4.4 or higher

Online upgrade: make sure your system is getting online condition.

Right click your NVR mouse>System setting>System Admin>System upgrade, choose Online upgrade, check upgrade when download finished, click Start.

2. Download the camera firmware 3.6.28, 

https://www.xmarto.com/download/firmware/IPG5323_W_20210803_3_6_28_572010(1).rom

3. Put the file to your USB flash disk's root directory, not in any folder.

4. Plug the USB flash disk to your NVR's USB port.

5. Go to System setting-CH Setting- IPC Maintenance, choose the firmware from USB Storage, and click start to update the firmware of your camera.

6. Go to System setting-CH Setting- Video Detection and enable the Motion Detection Tracking

Now, your PTZ camera DZ2034/DZ20313, DT3034/DT30320, WT2054/WT20512, DPM2024 can achieve the auto tracking function when they connect to the NVR system.

Average rating: 0 (0 Votes)

You cannot comment on this entry

Need more help? Please Contact us >>